Weight | N/A |
---|---|
Dimensions | N/A |
Baluster Color | Black, Bronze |
Finish | Powder Coated |
Length | 30 1/8 in, 30 3/4, 32 1/4, S.O Length, 18 in, 24 in, 44 in |
Flat Bar Aluminum Baluster Face Mount
Dextrusions
3/16″ x 1″ Solid Aluminum Flat Bar. 2 Holes at the top and 2 holes at the bottom. Powder coated Black or Bronze
COMES WITH COLOR MATCH SCREWS TO INSTALL!
This product can be custom ordered to almost any Length, with either 1 hole or 2 depending upon your preference. 32 1/4 and 44″ is the stock size anything under 32 1/4 ” is $6.00. Anything over 44″ must be quoted. Give us a call are message
- Best Price Guarantee
- Buy direct so you save money.
- Medium Items Shipping
- Medium items add 10-20% to the order depending on delivery location
- Top brands you can trust
- A combination of quality and value that cannot be matched.
3/16″ x 1″ Solid Aluminum Flat Bar. Two holes at the top and two holes at the bottom. Powder coated Black or Bronze
COMES WITH SCREWS!
This product can be custom ordered to almost any size, with either 1 hole or 2 depending upon your preference. 32 1/4 and 44″ is the stock size anything under 32 1/4 ” is $5.00. Anything over 44″ must be quoted. you cannot order 1 of 8 different sizes and wonder why the price changes. it is a special job requires time……. we can do 40 at a time and all stays the same. each different sizes requires set up. which has to be quoted.
S/O Means Special Order. Write size in notes you need.
Question
MG –
What is the distance to the screw holes from the ends?
(0) (0) Watch Unwatch
Steve Scholl –
3/4″ to the edge of the hole
(0) (0)
Question
D G –
Can you order the 32 1/4″ in black with one hole for $4?
(0) (0) Watch Unwatch
Steve Scholl –
no it’s a special order, makes it 6.00 we have to change the tooling around
(0) (0)
Sparke –
We replaced our outdated wooden balusters with these black aluminum ones. They were very easy to install and they look great. They have a sleek clean appearance and greatly improved the look of our deck. I highly recommend them.
(0) (0) Watch Unwatch
Steve Scholl –
they are 1″ wide
(0) (0) Watch Unwatch
Question
Stacie M. Niedzwiecki –
Can you make these 32″ tall and 2 1/4″ wide? If yes, what would the cost be and the lead time?
(0) (0) Watch Unwatch
Steve Scholl –
you need to do 10,000 pieces to make a new die etc to produce, do you want 10,000?
(0) (0)
Lisa G. (verified owner) –
Needed a custom length baluster for our rebuilt deck railing. Even custom sized they cost less than in the big box stores. Very quick turnaround, received them a few days after order placed.
(0) (0) Watch Unwatch
Vickie Gunter (verified owner) –
The Deck Barn processed and shipped our order quickly. We were amazed how quickly our balusters arrived. They are beautiful and created a better than expected appearance to our back deck. I love the ambience and classy look that these balusters brought to our special little relaxing area.
(0) (0) Watch Unwatch
Steve Scholl –
Thank You!
(0) (0)
Steve Scholl –
send pics please
(0) (0)
Question
Pat –
Can I use this product outdoor.s? The photo of this product shows indoor installation. Thank you!
(0) (0) Watch Unwatch
Steve Scholl –
yes it is made for outdoors send us your pictures and we will post them
(0) (0)
Question
Katherine Bergamo –
Can I order these balusters in 24″ length?
(0) (0) Watch Unwatch
Katherine Bergamo –
54
(0) (0)
Steve Scholl –
yes they have to be made about 2 weeks and they are 4.00 each
(0) (0)
Steve Scholl –
how many?
(0) (0)