The Kit Contains

2   6' cedar 2 x 4 (4 sq edges, no bark) with Dextrusions Brand Connectors attached  4.25 inches on center, leaves 3  3/4 inches between the Dextrusion Brand Balusters

17 Dextrusions Balusters, 2  1x3 3' cedar, and  16   8 x 2 1/2  Dacronized (epoxy coated) Screws,

No sorting through the lumber pile to find nice looking Cedar, We've already done that for you and attached the connectors too!

To Install, center the railing section between the 2 posts, leaving an equal space on each end, don't forget the 1 x 3,  scribe, cut on a mitre box.  Install the balusters over the connectors with the rail sections horizontal ( lying down), once all are on, stand the rail section up and push down to make sure all the Dextrusion Brand Balusters are properly seated.  Attach the 1 x 3 to the ends of the 2 x 4 using 2  8 x 2 1/2 screws per  2 x 4.  Attach the completed rail secton to the railing post using 4    8 x 2 1/2  screws. Make sure the screws are close to the 2x4 for a solid connection. Complete the railing with a top cap making sure to screw into the railing post and the horizontal 2 x 4 of the railing section.